Sonance Sonamp 33-5052 - Manual (Page 2)

The new Sonamp 875D SE is a hybrid 8-channel amplifier that combines the efficiency of digital amplification with proven analog
power supply technology, delivering unprecedented efficiency, compactness and high-end sound quality in an extremely flexible
and useful package. Serial volume commands add flexibility for second zone use.
Class T digital amplification with Digital Power Processing® allows the
875D SE to deliver high power (75 watts @ 8 ohms and 140
watts @ 4 ohms x 8 channels) in an exceptionally small (2U rack height) package, with all the musical sound quality Sonamps have
become known for. Unlike conventional digital amplifiers, the
875D SE ’s Class T circuitry allows it to operate with any of its four
pairs of channels in a bridged mode, providing 300 watts x 4 channels into 8-ohm loads. Four independent power supplies (one
for each zone) use trusted analog technology to assure that each zone will receive plenty of current regardless of how hard any
other zones are being driven.
Serial control capability allows the
875D SE to be directly controlled by a variety of top-line 3rd-party control systems. In addition
to controlling volume and an extensive array of operational features, the serial query provision also allows the 875D SE ’s operation
to be monitored from a remote location.
The
Sonamp 875D SE incorporates BBE Sound Enhancement that improves presence and detail of speakers, especially at lower
power listening volumes. This makes it particularly effective at improving the sound quality of distributed audio systems playing
background music. BBE also restores clarity and definition (or focus) to spoken voices, making paging systems easier to understand
without having to run them at high volumes.
The
875D SE ’s multiple input connections (Direct, L/R & Aux) and buffered line outputs provide the connection flexibility that
Sonance dealers have come to expect. Each zone has its own 12V input and output triggers and defeatable auto-on signal sensing
that help maximize power management for the channel configuration in use at any time. Recessed front-panel controls allow
tamper-resistant adjustment of each channel’s input level, and of each zone’s auto-on sensitivity.
Features
Extensive serial control capability gives you the ability to integrate the 875D SE into any number of top-level control
systems, providing
• global, zone-specific or channel-specific commands for volume and muting
• commands for setting BBE Sound Enhancement
• automatic temperature and fault alerts
• query commands allow the user to poll the amplifier so it will report its operating conditions back to the monitoring station
©2008 Sonance, All Rights Reserved. Sonance and Sonamp are registered trademarks of Dana Innovations.
BBE is a registered trademark of BBE Sound, Inc. Digital Power Processing is a registered trademark of Tripath Technology, Inc.
Due to continuous product improvement, all features and specifications are subject to change without notice. For the latest Sonance product information, go to: www.sonance.com
SONAMP ® 875D SE
Stereo Power Amplifier
Sonance
212 Avenida Fabricante
San Clemente, CA 92672-7531
USA, 1.800.582.7777
sonance.com
Specifications
875D SE Stereo Power Amplifier
Number of Channels: 8 (four stereo pairs)
Output Power (Stereo): 75 watts RMS per channel (X8), 0.25% THD
20Hz - 20kHz, @ 8 ohms
140 watts RMS per channel (X8) 0.1% THD
1kHz, @ 4 ohms
Output Power (bridged): 300 Watts per channel (X4) @ 8 ohms
Frequency Response: 20Hz – 20kHz, ±1dB
Total Harmonic Distortion: 0.05% (1kHz, 8 ohms)
0.10% (1kHz, 4 ohms)
Signal to Noise Ratio: -96dB (w/22kHz filter)
Input Sensitivity: 1.5V for 75W RMS Output;
1.3V w/BBE ON (+6dB)
1.0V w/BBE ON (+9dB)
Input Impedance: 10k ohms
Maximum Source Input Voltage: 4.0 VAC RMS
3.0 VAC RMS w/BBE ON
Loop Output Impedance (buffered) : 100 ohms
Serial Protocol (RS-232 Connection) : 9600, N, 8, 1, single CR
Power Consumption: 1,200 watts
BTU/HR: 850
AC Fuse: 10A (T10AL ~ 250V)
Dimensions (W x H x D): 16 3/4” x 3 7/8” x 17 1/4”
(425mm x 98mm x 438mm)
Shipping Weight: 47 lbs (21.4kg)
ON
ON
ON
ON
OFF
OFF
OFF
OFF
ON
ON
ON
ON
OFF
OFF
OFF
OFF
ON
ON
ON
ON
OFF
OFF
OFF
OFF
ON
ON
ON
ON
OFF
OFF
OFF
OFF
ON
ON
ON
ON
OFF
OFF
OFF
OFF
ON
ON
ON
ON
OFF
OFF
OFF
OFF
ON
ON
ON
ON
OFF
OFF
OFF
OFF
ON
ON
ON
ON
OFF
OFF
OFF
OFF
L
R
A
BBE CONTROL
BUS
INPUT OUTPUT BUFFERED
DIRECT
LEFT
RIGHT AUX
DIRECT
LEFT
RIGHT AUX
DIRECT
LEFT
RIGHT AUX
DIRECT
LEFT
RIGHT AUX
DIRECT
LEFT
RIGHT AUX
AUTO VOLT
AUTO
VOLT
AUTO
VOLT
AUTO
VOLT
TRIGGER MODE
DIRECT
LEFT
RIGHT AUX
DIRECT
LEFT
RIGHT AUX
DIRECT
LEFT
RIGHT AUX
BBE CONTROL INPUTS 5 – 24V AC–DC
EXTERNAL TRIGGER INPUTS 5 – 24V AC–DC
TRIGGER OUTPUTS
12VDC
OFF LOW OFF LOW OFF LOW OFF LOW
ON HIG
H
ON HIG
H
ON HIG
H
ON HIG
H
1/2 3/4 5/6 7/8
+ 8 – – 7 + + 6 – – 5 + + 4 – – 3 + + 2 – – 1 +
CH
CH1 CH2
D E G D I R B L A M R O N D E G D I R B L A M R O N
H C L L A
CH
RS-232
1/2 3/4 5/6 7/8
CH 1/2
CH 3/4
CH 5/6
CH 7/8
OFF ON
ALL
S/N
1/2 3/4 5/6 7/8
+ – + – + – + – + –
BRIDGED
8Ω MIN
BRIDGED
8Ω MIN
BRIDGED
8Ω MIN
BRIDGED
8Ω MIN
D E G D I R B L A M R O N D E G D I R B L A M R O N
+ – + – + – + –
(BRIDGED)
CH3 CH4
(BRIDGED)
CH5 CH6
(BRIDGED)
CH7 CH8
(BRIDGED)
CAUT
ION: REPLACE WIT
H T
HE
SAME T
YPE AND RAT
ING F
US E SONAMP ® 875D SE
120V–6
0Hz 1200W
–F
US E T 10AL 250V
RS-232
RS-232
RS-232
RS-232
33-5052