Cd pla y ba c k, Advanced cd playback (continued), Direct play – Sharp SD-EX200 User Manual

Page 18: Switching the time display, Repeat or random play

Advertising
background image

18

SD-EX200

03/3/14

SD-EX200_sec.fm

TINSZ0523AWZZ

CD Pla

y

ba

c

k

- A

d

v

a

n

ced

CD

Pl

ay

b

a

ck

-

Advanced CD Playback (continued)

„

Direct play

By using the direct buttons, the desired tracks can be played.

Notes:

z

After pressing the " 10" button, the two digits must be entered within 5 seconds of
each other.

z

It is not possible to enter a track number higher than the total tracks of the CD.

z

You cannot select a track with the direct buttons while in random or program play.

„

Switching the time display

Each time the TIME button on the remote control is pressed during playback, the dis-
play will change.

„

Repeat or random play

You can select one of the CD playback mode; "Repeat play", "Random play" and
"Normal play".

To repeat a programmed sequence:

Perform steps 1 - 5 in the "Programmed Play" section and then select the repeat play-
back.

Notes:

z

During program operation, the random mode cannot be selected by the PLAY
MODE button.

z

After using repeat play, be sure to press the button. Otherwise, the disc will play
continuously.

z

The random play will stop automatically when all tracks are played once. (The
same track will not be played back twice.)

z

In random play, the CD player will select and play tracks automatically. (You cannot
select the order of the tracks.)

To cancel repeat or random play:

Press the PLAY MODE button repeatedly to select the normal play mode.

Press the direct buttons to select the desired track.

The direct buttons will allow you to select and play any track from 1 to 10 automati-
cally.

To select a track between 11 and 99:

Press the " 10" button followed by the two digits of the track number.

For example, to choose 28

1 Press the " 10" button.
2 Press the "2" button.
3 Press the "8" button.

The elapsed playing time for the current track will
be displayed.

The remaining playing time for the current track
will be displayed.

1

When in the CD mode, press the PLAY MODE button repeatedly to
select the playback mode.

2

Press the

button to start playback.

Normal play

Repeat play

Random play

Advertising