Sanyo PLV75L/PLV-80L - Manual (Page 42)

42
SETTING
The PIN code can be changed to your desired four-digit
number.
Select "PIN code change" with the POINT DOWN button, and
press the SELECT button. The New PIN code input dialog box
will appear.
Select a number with the POINT LEFT/RIGHT buttons and fix
the number with the SELECT button. Repeat it to complete
entering a four-digit number. When the four-digit number is
fixed, the pointer will automatically move to "Set". Then press
the SELECT button.
To Change the PIN Code
Change the PIN code
Select PIN code
change and press
the SELECT button.
The New PIN code
input dialog box will
appear.
The input numbers
are being displayed
for confirmation.
Select Off, On1, or On2 with the POINT LEFT/RIGHT buttons
and then "Quit" with the POINT DOWN button and press the
SELECT button to close the dialog box.
To Change the PIN Code Lock setting
Change the PIN Code Lock setting
Select a desired
setting with the
POINT
LEFT/RIGHT
buttons.
CAUTION:
WHEN YOU HAVE CHANGED PIN CODE, WRITE DOWN THE
NEW PIN CODE IN COLUMN OF THE PIN CODE NO. MEMO
ON PAGE 59, AND KEEP IT SECURELY. SHOULD THE PIN
CODE BE LOST OR FORGOTTEN, THE PROJECTOR CAN NO
LONGER BE OPERATED.
PIN code lock
This function prevents the projector from being operated by an
unauthorized person and provides the following settings for
security options.
Off ...............the projector is not locked with the PIN code.
On1 .............requires to enter the PIN code every time turning on
the projector.
On2 ..........requires to enter the PIN code to operate the
projector once the power cord is disconnected; as
long as the AC power cord is connected, the
projector can be operated without the PIN code.
Whenever to change the PIN Code Lock setting or the PIN code
(the four-digit number), you are required to enter the PIN code.
"1234" is set as the initial PIN code at the factory.
PIN code lock
When the projector is
locked with the PIN
code, the PIN code
lock mark appears on
the menu bar.
Enter a PIN code
Quit
Pointer
The input numbers
change to “
✳” for
security.
Enter a PIN code
Select a number by pressing the POINT LEFT/RIGHT buttons
and fix the number with the SELECT button. The number will
change to "
✳". If you fixed a wrong number, move the pointer to
"Set" or "Clear" once by pressing the POINT DOWN button,
then return to "PIN code". Enter the correct number again.
Repeat this step to complete entering a four-digit number.
When the four-digit number is fixed, the pointer will
automatically move to "Set". Press the SELECT button so that
you can change the following PIN code lock settings.
If you entered a wrong PIN code, "PIN code" and the number
(
✳✳✳✳) will turn red and disappear. Enter a correct PIN code
all over again.
When the pointer
automatically move
to "Set", press the
SELECT button.
Security SVGA1