Power control, Digital setup, Audio setup – Sharp Aquos LC 37SH20U User Manual

Page 27

Advertising
background image

26

Disable

Enable

PCM

Dolby Digital

Press MENU to exit.

5

Power Control

Power control setting allows you to save energy.

No signal off

When set to “Enable”, the power will automatically shut
down if there is no signal for 15 minutes.

Audio Setup

You can output digital audio to an AV amplifi er or
similar device whose DIGITAL AUDIO INPUT terminal
is connected to the DIGITAL AUDIO OUTPUT terminal
on the TV. Please select an audio output format
compatible with the audio format of the program you
are watching and the equipment connected.

NOTE

• “Disable” is the factory preset value.
• When a TV program fi nishes, this function may not operate.

NOTE

• “Disable” is the factory preset value.

Press

a/b to select “PCM” or “Dolby

Digital”, and then press ENTER.

Press MENU and the MENU screen displays.

Press

c/d to select “Power Control”.

Press

a/b to select “No Signal Off”, and

then press ENTER.

Press

c/d to select “Enable”, and then

press ENTER.

• Five minutes before the power shuts down, the

remaining time displays every minute.

No operation off

When set to “Enable”, the power will automatically shut
down if there is no operation for 3 hours.

Repeat steps 1 and 2 in No signal off.

Press

a/b to select “No Operation Off”, and

then press ENTER.

Press

c/d to select “Enable”, and then

press ENTER.

• Five minutes before the power shuts down, the

remaining time displays every minute.

Digital Setup

This setting allows you to optimize the settings of
Digital broadcasting.

Press MENU and the MENU screen displays.

Press

c/d to select “Digital Setup”.

Press

a/b to select “Audio Setup”, and then

press ENTER.

Basic adjustment settings

1

2

4

3

1

2

3

1

2

4

3

Selected item

PCM

Dolby Digital

Description

The optical output terminal outputs
audio signal in PCM form. If your
digital audio system does not support
Dolby Digital, select “PCM”.

The optical output terminal outputs
audio signal in Dolby Digital form.
It reproduces sound from surround
program of digital.

Press MENU to exit.

4

Press MENU to exit.

5

Advertising