Sony DMX-P01 - Manual (Page 8)

8
Location and Function of Parts and
Controls
Front Panel
1 Input section
2 Digital function section
3 Power switch
4 LEVEL control
5 PHONES connector
6 Headphones monitor mode switch
7 Output section
1 Input section 1 PAN control
Adjusts the mix level of the input
signal sent to the Left and Right buses.
The adjustable range is 0 dB to –3 dB
(at the center position) to -
∞
.
When the control is turned fully to
the L side: The signal is sent to the
Left bus at a 0 dB gain. The signal
to the Right bus is completely
attenuated
When the control is turned fully to
the R side: The signal is sent to the
Right bus at a 0 dB gain. The
signal to the Left bus is completely
attenuated.
When the control is placed at the
center position: A signal of –3 dB
is sent to both the Left and Right
buses.
1 PAN control
2 LCF switch
3 Input level control
4 Input gain control
5 LINK/M-S switch