Sprint Nextel H 11/07 - Manual (Page 53)

36 Section 2A: Phone Basics
Dialing From the Contacts List
1. Press Menu > Contacts > Find/Add Entry.
2. Select the entry you want to call and press to dial
the entry’s default phone number.
– or –
To dial another number from the entry, select the name
and press
, and then select a number and press .
Using Speed Dialing
You can store up to 99 numbers in your phone’s speed dial
memory to make contacting friends and family as easy as
pressing a button or two. With this feature, you can speed dial
entries using one keypress for locations 1–9 or two keypresses
for locations 10–99.
To use One-Touch Dialing for speed dial locations 1–9:
ᮣ
Press and hold the appropriate key for approximately
two seconds. The display confirms that the number has
been dialed when it shows “Calling...”.
Touse Two-Touch Dialing for speed dial locations 10–99:
1. Press the first digit.
2. Press and hold the second digit for approximately two
seconds. The display confirms that the number has been
dialed when it shows “Calling...”.
Note Speed dialing is not available when you are roaming; when
you are roaming off the Sprint National Network, you must
always dial using eleven digits (1 + area code + number).
Shortcut From standby mode, press Contacts (right softkey) to
list entries.