Sony DAV-DX355 - Manual (Page 75)

Ad
v
a
nc
ed Settings and Adjus
tments
75 US
x [BLACK LEVEL (COMPONENT OUT)]
Selects the black level (setup level) for the video
signals output from the COMPONENT VIDEO
OUT jacks.
You cannot select this and the setting is not
effective when the system outputs progressive
signal.
x [4:3 OUTPUT]
This setting is effective only when you set [TV
TYPE] in [SCREEN SETUP] to [16:9]
(page 73). Adjust to watch 4:3 aspect ratio
progressive signals. If you can change the aspect
ratio on your progressive format compatible TV,
change the setting on your TV, not the system.
Note that this setting is effective only for HDMI
connection or progressive signals output from
the COMPONENT VIDEO OUT jacks.
Note
• This setting is effective only when “P AUTO
(PROGRESSIVE AUTO)” or “P VIDEO
(PROGRESSIVE VIDEO)” is selected by using
PROGRESSIVE (page 26).
Use this to set up playback related and other
settings.
Select [CUSTOM SETUP] in the Setup Display.
To use the display, see “Using the Setup
Display” (page 71).
The default settings are underlined.
x [PAUSE MODE] (DVD VIDEO/DVD-R/
DVD-RW only)
Selects the picture in pause mode.
x [TRACK SELECTION] (DVD VIDEO only)
Gives the sound track which contains the highest
number of channels priority when you play a
DVD VIDEO on which multiple audio formats
(PCM, DTS, MPEG audio, or Dolby Digital
format) are recorded.
Note
• When you set the item to [AUTO], the language may
change. The [TRACK SELECTION] setting has
higher priority than the [AUDIO] settings in
[LANGUAGE SETUP] (page 73). (Depending on
the disc, this function may not work.)
• If PCM, DTS, Dolby Digital sound, and MPEG audio
tracks have the same number of channels, the system
selects PCM, DTS, Dolby Digital sound, and MPEG
audio tracks in this order.
[OFF] Lowers the standard black level.
Use this when the picture becomes
too white.
[OFF] Sets the black level of the output
signal to the standard level.
[ON] Raise the standard black level.
Use this when the picture becomes
too black.
[FULL] Select this when you can change
the aspect ratio on your TV.
[NORMAL] Select this when you cannot
change the aspect ratio on your
TV. Shows a 16:9 aspect ratio
signal with black bands on left and
right sides of the image.
16:9 aspect ratio TV
Custom Settings
[CUSTOM SETUP]
[AUTO] The picture, including subjects
that move dynamically, is output
with no jitter. Normally select this
position.
[FRAME] The picture, including subjects
that do not move dynamically, is
output in high resolution.
[OFF] No priority given.
[AUTO] Priority given.
MULTI-DISC RESUME:
CUSTOM SETUP
AUTO PAUSE MODE:
OFF TRACK SELECTION:
ON
AUDIO DRC: OFF
AUDIO (HDMI): OFF
continued