Sony 4-144-907-43(1) - Manual (Page 87)

87 GB
D:\NORM'S JOB\SONY HA\SO0056\STR-DA3500ES\CEL VERSION\GB\4144907431\01GB-
STRDA3500ESUC\090OTH_GB.fm masterpage: Right
STR-DA3500ES
4-144-907-43(1)
Us
ing Multi-zone
Features
Switching the zone
setting of the remote
The remote commander is initially set to be
used in zone 2. If you want to use it in zone 3,
switch the zone setting of the remote.
1
Press ?/1 while pressing RM
SET UP.
The AMP and ZONE buttons flash.
2
Press ZONE.
The AMP button goes off, the ZONE
button keeps flashing and the SHIFT
button lights up.
3
Press the numeric button 2 for
the zone 2, or 3 for the zone 3
while the ZONE button is
flashing.
The ZONE button lights up.
4
Press ENT/MEM.
The ZONE button flashes twice and the
remote switches to zone 2 or zone 3
mode.
For details on the connections and settings of
zone 2 and zone 3, see “Using Multi-zone
Features” (page 82).
The following operations are described for
connecting an IR repeater and operating the
receiver in zone 2 and zone 3. When an IR
repeater is not connected, use this receiver in
the main zone.
1
Turn on the main receiver (this
receiver).
AMP
?/1
2, 3
SHIFT
ZONE
RM SET
UP
ENT/
MEM
Operating the receiver from
another zone
(ZONE 2/ZONE 3 operations)
?/1
ZONE
Input
buttons
MASTER
VOL +/–
SOURCE
continued