Sharp BD-HP210U - Manual (Page 44)

SETTINGS
USB Memory Management
The following instructions explain how to delete data
such as the Virtual Package data and the BD-LIVE
data in a USB memory device.
Insert the USB memory device into the BD
STORAGE/SERVICE terminal on rear of this
player.
Press SETUP to display the Setup Menu screen.
Press a/b/c/d to select “Settings”, then
press ENTER.
Press a/b to select “USB Memory
Management”, then press ENTER.
“No USB Memory” appears when no USB memory is
inserted.
Press a/b, select “Erase” or “Format”, then
press ENTER.
Erase: Deletes only BD-VIDEO data written on the USB
memory device such as BD-LIVE data.
Format: Be aware that all data including BD-VIDEO data
and software update data will be deleted.
If you want to delete only the unneeded software
update data after the software is updated, delete the
data on the USB memory device using a PC.
Erases BD-VIDEO data on USB memory.
Erase all contents on USB memory
including protected contents. Format
Erase
NOTE
Data which has been saved to the player’s internal memory
(game score, etc.) will also be deleted. •
Press
c/d, select “Yes”, and press ENTER.
Yes No
Start the process.
The screen for the current operation will display.
OK
Complete
Press ENTER.
1
2
3
4
•
5
•
6
7
•
8
Before using the USB memory device
CAUTION:
Do not remove the USB memory device or unplug
the AC cord while the operations for “USB Memory
Management” or “Software Update” are being
performed.
Do not use a USB extension cable when connecting
a USB memory device to the BD STORAGE/SERVICE
terminal of the player.
Using a USB extension cable may prevent the player
from performing correctly.
NOTE:
SHARP cannot guarantee that all brands’ USB memory
devices will operate with this player.
Only USB memory devices formatted with FAT 32/16
are compatible.
•
•
−
•
•
42