Standard Horizon HX270S User Manual
Page 13
HX270S
Page 11
4.1 CONTROLS AND CONNECTIONS
Antenna Connector
The supplied CAT460 flexible antenna is attached here.
POWER SWITCH/VOLUME CONTROL
Turns the transceiver on and off, and adjusts the volume.
PUSH-TO-TALK (PTT) SWITCH
Activates transmission.
SQUELCH (SQL) SWITCH
Sets the point at which random noise on the channel does not activate
the audio circuits but a received signal does. This point is called the
Squelch threshold. Further adjustment of the squelch control will de-
grade the reception of wanted transmissions.
BUSY/TX INDICATOR
This indicator glows green when a signal is being received and red when
transmitting.
UP (
) KEY
Used to select a desired channel. Each press increases the channel
number. When held down, the channels increase continuously.
DOWN (
) KEY
Used to select a desired channel. Each press decreases the channel
number. When held down, the channels decrease continuously.
16/9 KEY
Immediately recalls channel 16 from any channel location. Holding down
this key recalls channel 9. The 16/9 key is also used to revert to the
channel selected before pressing the 16/9 key.
Example: select Ch68, press 16/9 key (Ch16 appears), press the 16/9
key again and Ch68 is shown.