Symbol Technologies PDT 8000 Series - Manual (Page 8)

6
P D T 8 0 0 0 S e r i e s
Installing Batteries
1. Remove the battery door.
2. Slide the latches on both sides of the battery down, to ensure
they are in the unlock position. Insert the battery into the
compartment.
3. Lock the battery into place by sliding the latches on the bat-
tery up.
4. Replace the battery door.
Caution: Do not expose the battery to temperatures in excess of
140°F (60°C). Do not disassemble, incinerate, or short
circuit the battery.
Battery
Latches