Stamina Products FUSION 15-7200 - Manual (Page 12)

ASSEMBLY INSTRUCTIONS
12
Socket of
Power Wire(28)
A.
B.
STEP 12
Refer to illustration A. Run the CONNECTION WIRE(26) through the hole in the plate on the HANDLEBAR(4).
Attach the HANDLEBAR(4) to the UPRIGHT(3) with BUTTON HEAD BOLT(M8x1.25x40mm)(70) and
FLAT HEAD SCREWS(M6x1x12mm)(78).
STEP 13
Plug the CONNECTION WIRE(26) into the EXTENSION WIRE on the COMPUTER(27). Attach the
COMPUTER(27) to the plate on the HANDLEBAR(4) with ROUND HEAD SCREWS(M5x0.8x15mm)(86).
STEP 14
Attach the MOUNTING BRACKET(106) to the UPRIGHT(3) with ROUND HEAD SCREWS
(M4x0.7x15mm)(85). Place the WATER BOTTLE(107) in the MOUNTING BRACKET(106).
STEP 15
Refer to illustration B. Plug the ADAPTER(105) into the SOCKET of the POWER WIRE(28) located on the
front of the bike. Plug the ADAPTER(105) into an electrical outlet.