Samsung ACE - Manual (Page 61)

46 Section 2B. Your Device’s Settings
Changing the Display Time-Out
Select the length of time the display stays on.
1. From standby mode, press Start > Settings > Power
Management > Display time out .
Ⅲ During standby, the device goes into sleep mode
after a specified period of time to conserve power.
Choose
Never , 10 seconds , 15 seconds , 30 seconds ,
1 minute , 2 minutes , 5 minutes , or 10 minutes .
2. Press the navigation key left or right to select a new
time-out setting and press
Done (left softkey).
Changing the Brightness
Adjust your screen’s brightness to suit your
surroundings.
1. From standby mode, press Start > Settings > Power
Management > Display brightness .
Ⅲ Adjust the brightness level for the display.
Choose Level 1 - Level 5.
2. Press the navigation key left or right to select a new
level setting and press
Done (left softkey).
Changing the Keypad Backlight Time-Out
Select the length of time the keypad backlight stays on
when you do not use the keys.
1. From standby mode, press Start > Settings > Power
Management > Keypad backlight time out .
Ⅲ Choose 1 second , 2 seconds , 3 seconds , 4 seconds ,
5 seconds , or 10 seconds .
2. Press the navigation key left or right to select a new
time-out setting and press
Done (left softkey).
Restricting the Keypad Backlight Time-Out
By default, the keypad backlight time-out is enabled all
the time. With this setting you can restrict the time of
day that the keypad backlight time-out will be enabled.
For example, if you were planning a day at the beach
(when you would not need the keypad backlight), you
could disable the backlight time-out for that period.
1. From standby mode, press Start > Settings > Power
Management > Keypad backlight on .
I325.book Page 46 Tuesday, December 11, 2007 11:23 AM