Making connections – Stanton RM-402 User Manual
Page 5
Outputs
Use the REC output to connect a stand-alone CD recorder, DAT
recorder, or tape deck. Use the BOOTH output to connect directly to
powered monitors or your monitor amp. The ZONE output can be used
if you need separate level control for a particular area of your club,
such as lounge vs. dance floor.
Master
These outputs are for connecting your main power amp, EQ,
crossover, etc. Both RCA and 1/4-inch jacks are provided. Using the
Master Output Trim control, you can adjust the overall level being sent
from the outputs—great when an additional boost or cut is needed.
Power Adapter Inlet
Connect the RM.402’s power supply here. Screw to the right, unscrew
to the left. You knew that, didn’t you?
Ground Terminals
Connect the grounding cables from your turntables here to avoid hum.
Making Connections