Sprint Nextel AIRCARD 402 - Manual (Page 25)

Using Y
o
ur
Devi
ce
Section 2C. Using Your AirCard 402 Device 19
Removing the AirCard 402 Device
1. Exit the Sprint SmartView software if it is open.
2. If you’re running Windows 2000, click the Unplug or Eject Hardware icon in the
system tray, and click the entry for NEC PCI to USB Open Host Controller or Standard
Enhanced PCI to USB Host Controller . If a dialog box appears notifying you that it is safe to
remove the device, click OK .
3. If your computer has a PC Card or ExpressCard ejector, use it to eject the device from
the slot.
4. Remove the device from your computer’s PC Card or ExpressCard slot by gripping
both sides of the device and pulling straight out.
Correct Incorrect
WARNING When inserting or removing your device, always grip it by its sides, as this prevents damage
to the device.