Sony STR-K402 - Manual (Page 22)

22
Location of Parts and Basic Operations
Front Panel Parts Description
MULTI CHANNEL DECODING
MASTER VOLUME
DISPLAY
–
+
MULTI CH IN INPUT MODE
BASS
MUTING A.F.D. ENTER
NAME
VIDEO DVD/LD TV/SAT
MD/TAPE CD TUNER
SET UP
MENU
LEVEL SURR SOUND CONTROL
SOUND FIELD
MODE 2CH
DIMMER
PHONES
? / 1
TREBLE –
– +
TUNING – +
PRESET
TUNING
MEMORY SHIFT FM MODE FM AM
– +
+
9 2 3 qa qs 4 1 8 0 7 5
qd qf w; qg qh qj qk ql
6
FM MODE button
If “STEREO” flashes in the display and the FM stereo
reception is poor, press this button. You will not have
the stereo effect but the sound is improved.
FM button
Selects the FM band.
AM button
Selects the AM band.
5 SET UP button/indicator
Press to activate the setup mode, then use the MENU
/ buttons (ql) to select any of the following
indications. You can then make various settings using
the MENU +/– buttons (qk).
When you select You can
Speaker type Specify the type of speakers.
(page 15)
Speaker setup Specify the front, center,
surround speaker sizes, the
surround speaker position, and
whether or not you are using a
sub woofer. (page 15)
Speaker Distance Specify the front, center, and
surround speaker distances.
(page 17)
Dimmer range Specify the display to turn off
when you press the DIMMER
button several times. (page 47)
MULTI CH IN Specify the video input to be
video input used with the audio signals from
the MULTI CH IN jacks.
(page 47)
6 MULTI CHANNEL DECODING indicator
This indicator lights up when the unit is decoding
signals recorded in a Multi Channel format.
7 LEVEL button / indicator
Press to activate the speaker level parameters (page
31). The indicator on the button lights up and you can
adjust the various speaker level parameters (front
balance, surround balance, etc.).
8 SURR button / indicator
Press to activate the surround parameters (page 30).
The indicator on the button lights up and you can
adjust the various surround parameters (effect level,
wall type, etc.).
9 MULTI CH IN button
Press to enjoy the audio source connected to the
MULTI CH IN jacks with the video from the selected
component. Press again to cancel MULTI CH IN.
• When the MULTI CH IN is selected, the tone, sound field
and surround parameters do not function.
0 Tone buttons
TREBLE +/– button
Press this button to adjust the tone (treble) (page 32).
BASS +/– button
Press this button to adjust the tone (bass) (page 32).