Sony KV-25RE10K - Manual (Page 15)

15
GB
Menu System
NOISE REDUCTION
The “Noise Reduction” option in the “Detail Set
Up” menu allows you to automatically reduce
the picture noise visible in the broadcast.
To do this: after selecting the option, press .
Then press or to select Auto. Finally
press OK to confirm and store.
To cancel this function afterwards, select “Off”
instead of “Auto” in the step above.
AV2 OUTPUT
Choose:
• TV to output the aerial source.
• AV1 to output sources connected to
: : : :1/ .
• AV3 to output sources connected to 3
and ≤ ≤ ≤ ≤ 3.
• YC3 to output sources connected to q q q q 3
and ≤ ≤ ≤ ≤ 3.
If your VCR supports SmartLink, this
procedure is not necessary.
To do this: after selecting the option, press .
Then press or to select the desired output
signal: TV, AV1, AV3, YC3 or AUTO.
If you select “AUTO”, the output signal
will always be the same one that is
displayed on the screen.
If you have connected a decoder to the
Scart
: : : :2/q q q q or to a VCR connected to
this Scart, please remember to change back
the “AV2 Output” to “AUTO” or “TV” for
correct unscrambling.
Level 1 Level 2 Level 3 / Function
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK
Detail Set Up
Noise Reduction:
AV2 Output:
RGB Centring Auto
TV
0
OK
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
continued...
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK
Detail Set Up
Noise Reduction:
AV2 Output:
RGB Centring Auto
TV
0
OK
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
01GBKV25/29RE10K.fm Page 15 Thursday, December 12, 2002 3:56 PM