Shure AXS1 - Manual (Page 4)

3
AXS 2 DYNAMIC MICROPHONE
The Shure AXS 2 is multi-purpose dynamic microphone designed for
use in a variety of sound reinforcement and recording applications,
including close-up vocals, instrument pickup, and public address.
The AXS 2 features a smooth frequency response Its cardioid pickup
pattern ensures high gain before feedback and excellent isolation
from unwanted sound sources. A neodymium magnet provides high
output level and an increased signal-to-noise ratio.
A superior shock mount system, a dent-resistant steel mesh grille,
and a sturdy die-cast handle.
SPECIFICATIONS
Type: Dynamic
Polar Pattern: Cardioid (unidirectional), symmetrical about axis
(Figure 2)
Frequency Response: 85 to 14,000 Hz (Figure 2)
Output Impedance: Rated at 150
Ω
(180
Ω
actual) for microphone
inputs rated from 75 to 300
Ω
Output Level (at 1 kHz): – 56.5 dBV/Pa ( 1.5 mV), open circuit
voltage:*
*1 Pa = 94 dB SPL
Polarity: Positive pressure on diaphragm produces positive volt-
age on pin 2 relative to pin 3 of the microphone output connector
Operating Temperature Range: –29
°
to 57
°
C (–20
°
to 135
°
F), 0 to
95% relative humidity.
Switch: Built-in On/Off switch
Connector: 3-pin male XLR connector
Case: Die cast zinc handle, black matte finish, dent-resistant steel
mesh ball grille
Dimensions: 163 mm L x 56 mm H (6.4” L x 2.2” W)
Net Weight: 289 g (10.2 oz)
FURNISHED ACCESSORIES
Break-Resistant Swivel Adapter A25D . . . . . . . . . . . . . . . . . . .
OPTIONAL ACCESSORIES
Shock Stopper TM Isolation Mount A55M . . . . . . . . . . . . . . . . . . .
Windscreen (7 colors available) A58WS Series . . . . . . . . . . . . .
7.6 m (25 ft.) Cable (XLR to XLR) C25J . . . . . . . . . . . . . . . . . . .