Woodstock SHOP FOX M1014 - Manual (Page 30)

-28-
M1014 7" x 12" Metal Cutting Bandsaw
M
A
INTE
N
A
N
CE
MAINTENANCE
Regular periodic maintenance on your SHOP FOX ®
Model M1014 will ensure its optimum performance. Make
a habit of inspecting your machine each time you use it.
Check for the following conditions and repair or
replace when necessary:
• Loose mounting bolts.
• Missing or leaking rubber toggle switch boots.
• Worn or damaged cords, switches, or plugs.
• Damaged V-belt.
• Any other condition that could hamper the safe
operation of this machine.
Frequently brush-off metal chips with a brush, or use a
shop vaccume to remove the chips. Keeping metal chips
away from bandsaw mechanisms is important to making
sure that your bandsaw lasts a long time.
This machine is equipped with a cutting fluid system,
which pumps water and oil based cutting lubricants. It is
especially important to make sure the internal working
parts of the motor and electrical switches are kept dry
and splash free.
Cleaning
General
MAKE SURE that your machine is
unplugged during all maintenance pro-
cedures! If this warning is ignored, seri-
ous personal injury may occur.