Samsung CLX-8380 - Manual (Page 49)

5.7
<Copying>
5 Press On to activate this feature, and select detailed settings for
each option.
• 1 Sided Original: Copys on one side of the paper.
• 2 Sided Original: Copys on both sides of the paper.
6 Press OK.
7 Press Start on the control panel to begin copying.
Note
This feature is possible only with A4, Letter, Legal, Folio, Oficio,
JIS B5, ISO B5, Executive, A5 and Statement sized paper.
Cover copying
The machine automatically adds covers to your copied set using stock
taken from a different tray. Covers must be the same size and orientation
as the main body of the job.
1 Place the originals face up in the DADF. Or place a single original
face down on the scanner glass. (Page 4.1)
2 Press Copy from the Main screen.
3 Select the tray in Paper Supply.
4 Press the Advanced tab > Covers.
Note
Once you have set the Paper Supply option to Auto, you
cannot use this feature.
5 Press On to use this feature, and select detailed settings for each
option.
• Position: Selects whether the cover will be placed at the front,
back, or both.
• Cover Sheet: Selects whether the cover will be 1 sided, 2 sided, or
blank paper.
• Paper Source: Select the paper tray, where the cover sheet is
loaded.
6 Press OK.
7 Press Start on the control panel to begin copying.
Transparency copying
When you prepare transparencies for presentations, use this feature to
copy the information.
Note
Before you start this special copy job, set the tray's Paper Types
and Paper Size to Transparency.(Page 4.9)
1 Place the originals face up in the DADF. Or place a single original
face down on the scanner glass. (Page 4.1)
2 Load the right-sized transparencies into the tray you have set.
3 Set the paper type to Transparency.
4 Press Copy from the Main screen.
5 Press the Advanced tab > Transparencies.
6 Select Transparencies option.
• No Separator: Does not place separator sheets between
transparencies.
• Blank Sheet: Places a blank sheet between transparencies.
• Printed Sheet: Places the same image on the divider sheets as
printed on the transparency.
7 Select media sources, in case you selected either Blank Sheet or
Printed Sheet.
8 Press OK.
9 Press Start on the control panel to begin copying.
Erasing edges
You can copy the original without any edges or margins.
1 Place a single original face down on the scanner glass. Or load the
originals face up in the DADF. (Page 4.1)
2 Press Copy from the Main screen.
3 Press the Image tab > Erase Edge.
4 Select the appropriate option.
• Off: Disables this feature.
• Border Erase: Erases equal amounts on all edges of the copies.
• Small Original Erase: Erases 0.25" (6mm) from the edge of the
copies. The original must be placed on the scanner glass to use
this feature.
• Hole Punch Erase: Erases hole punch marks from the left edge of
the copies.
• Book Center and Edge Erase: Erases shadows of a binding or
book edge from the center and side edges of the copies. This
feature only applies when you do copying a book. (Page 5.6)
Note
If you have set the Book Copy option to Off, you cannot use
Book Center and Edge Erase.
5 Press OK.
6 Press Start on the control panel to begin copying.
Erasing background images
This feature is helpful when copying originals containing color in the
background, as in newspapers or catalogs.