Samsung SP-P310ME - Manual (Page 14)

Using a non-designated battery may damage the projector.
Avoid heat or impact to the battery.
Avoid strong force/impact to the battery, such as dropping or throwing the battery. Avoid exposing
the battery to high temperatures such as a sauna. This may generate heat or cause fire or the
battery to explode. If the battery generates heat or fire, is damaged or deformed, immediately
remove the battery from the projector, and isolate the battery in a safe location as it may generate
heat or cause fire or explosion. Contact a nearby service center.
Do not apply strong pressure to the battery, or do not impact the battery with a sharp object.
Do not press the battery hard when it is in a bag or do not punch or impact the battery with a sharp
object such as gimlet, nail or tack. It may damage the battery or generate heat, cause fire, or
explosion.
When not using the battery over a long period.
Leaving the projector with the battery installed over a long period may cause discharge of the
battery or malfunction even if the power has turned off. Remove the battery from the projector when
not using it over a long period. When using the rechargeable battery for the first time or after a long
period of not being used, charge the battery fully first.
Turn the power off first.
Do not remove the battery when the power is on as it may damage the projector.
Use only an authorized adapter.
If an unauthorized adaptor is used, the projector battery may become damaged or explode.
Do not look directly at the lens when installing the battery.
When the battery is connected to the projector, the screen is automatically turned on. Looking
directly at the lamp light may cause damage to your eyesight.
Avoid contact between the battery charging terminals and metal objects such as necklaces, coins,
keys, etc.
This may cause fire or explosion.
Do not place the battery in air-tight locations with high temperatures such as inside a vehicle
exposed to the direct ray of light. Keep the battery indoors (0°C ~ +40°C / 32°F ~ +104°F).
This may cause external deformation or explosion.
Keep the battery out of children's reach or pets to prevent them from putting the battery in their
mouth.
If the battery is flooded or damaged, it may explode.
This may cause fire.
Coming into contact with a damaged battery (also orally) may affect the human body. If the battery
is broken and the battery fluid comes into contact with your skin, wash the fluid off with flowing
water for 1 or 2 minutes so that the fluid is completely washed off.
| Product Features | Product Views | Battery (sold separately) | Product Specifications |
The external design and product specifications may change without prior notice due to improvements to the product
performance.
Product Specifications
Model SP-P310ME
Panel
Size 13.97 mm (0.55 inch)
Resolution 800 x 600 (SVGA)
Light Source LED
Power
Power
Consumption
Less than 30 W (without Battery)
Standard