Star Manufacturing LC-4522 - Manual (Page 40)

Using the EDS Mode 37
Switch 5: Buzzer
Specifies whether the beep command of buzzer is enabled (ON) or disabled .
Switch 6: Print direction command
Specifies whether the print direction command <ESC>”U”n is enabled (OFF) or disabled.
Switch 7: Not Used
BANK D
Switches 1, 2, 3, 4: International Character Set
Select the international character set you want to use. This setting determines the
assignment of 16 character codes.
ON, ON, ON, ON :USA OFF,ON, ON, ON :Japan
ON, ON, ON, OFF :France OFF,ON, ON, OFF :Norway
ON, ON, OFF,ON :Germany OFF,ON, OFF,ON :Denmark-2
ON, ON, OFF,OFF :England OFF,ON, OFF,OFF :Spain-2
ON, OFF,ON, ON :Denmark-1 OFF,OFF,ON, ON :Latin America
ON, OFF,ON, OFF :Sweden OFF,OFF,ON, OFF :Korea
ON, OFF,OFF,ON :Italy OFF,OFF,OFF,ON :Ireland
ON, OFF,OFF,OFF :Spain-1 OFF,OFF,OFF,OFF :Legal
Switch 5: Strobe timing
Specifies whether the strobe timing of parallel interface is Normal (ON) or Special timing.
When printer is connected with Special terminal, it’s necessary to change the timing to Special.
Switch 6: ACK timing
Specifies whether the strobe timing of parallel interface is Normal (ON) or Special timing.
When printer is connected with Special terminal, it’s necessary to change the timing to Special.
Switch 7: Not Used