Samsung 330TFT - Manual (Page 16)

6. Remove 4 screws on the Rear Panel Bracket.
(15Ó : 6 screws)
7. Remove the Bracket Assembly from the Front
Cover.
8. Remove 1 screw on the Power PCB.
9. Remove Function PCB from locking area of
Function Knob.
10. Remove 4 screws on the Shield of Panel.
11. Remove the Shield.
12. Disconnect the jack between Panel and
Inverter PCB.
13. Remove Rear Bracket.
14. Remove 2 screws between Rear Bracket and
Inverter PCB.
15. Remove the Interface wire on the Rear Side of
Panel.
5-1-3 Stand Disassembly
1. Stand the stand assembly with the base close
to you.
5 Disassembly and Reassembly
5-2 SyncMaster 33*TFT/53*TFT
Figure 5-5
Figure 5-6
Figure 5-7
Figure 5-8