Samsung SPH-A920 - Manual (Page 26)

17 Phone Basics
Tip: To redial your last recent call, press twice.
Tip: Some networks support + dialing. + dialing automatically
indicates to the network that you are dialing an international call and
adds the international dialing prefix (typically ‘011’) to the call
automatically. To use + dialing, press and hold
(until the +
appears) before entering the phone number.
You can also place calls from your phone by using Voice Command
(page 34), Speed Dialing numbers from your Contacts (page 23), and
using your Call History listings (page 61).
Answering Calls
To answer an incoming call:
1. Make sure your phone is on. (If your phone is off, incoming
calls go to voicemail.)
2. Press to answer an incoming call. (Depending on your
phone’s settings, you may also answer incoming calls by
opening the phone or by pressing any number key. See “Call
Answer Mode” on page 139 for more information.)
Your phone notifies you of incoming calls in the following ways:
•
The phone rings or vibrates (unless set to Silence All).
•
The LED flashes.
•
The backlight illuminates.
•
The screen displays an incoming call message.
If the incoming call is from a number stored in your Contacts, the
Contacts entry’s name is displayed. The caller’s phone number may
also be displayed, if available.
The following options are also available to handle an incoming call:
A920 BMC Guide.book Page 17 Friday, December 9, 2005 12:20 PM