Sony RDR-GX33 - Manual (Page 41)

41
T
im
e
r R
e
co
rd
in
g
3
Select an item using </, and
adjust using M/m. Then press ENTER.
To make additional changes to items in
different rows, return to step 2. The
adjustable items are listed below.
“Day and Time”:
Sets the date, start time, and stop time,
and selects the channel or input source.
The date item changes as follows:
Today
y …… y Sat 12/2 (30 days
later) y Sun (every Sunday) y ……
y Sat (every Saturday) y Mon - Fri
(Monday to Friday)
y Mon - Sat
(Monday to Saturday) y Daily y
Today
“Mode”:
Selects the recording mode (page 39).
“Extend Time”:
Sets the duration in increments of
10 minutes, for a maximum of
60 minutes when a timer recording is in
progress. If the program set to be
recorded daily or weekly is extended, the
manually extended time set here will be
added to the subsequent timer recording
times.
• If you make a mistake, select the item
and change the setting.
4
Select “OK,” and press ENTER.
The “TIMER LIST” display (page 44)
appears. The TIMER REC indicator
lights up on the front panel and the
recorder is ready to start recording.
Unlike a VCR, there is no need to turn off
the recorder before the timer recording
starts.
To stop recording during timer recording
Press x REC STOP.
Note that it may take a few seconds for the
recorder to stop recording.
Rec Mode Adjust
If there is not enough available disc space for
the recording, the recorder automatically
adjusts the recording mode to enable the
entire program to be recorded. Set “Rec
Mode Adjust” of the “Timer Settings” to
“On” in the “Recording” setup (page 78).
If the timer settings overlap
Overlapped timer settings are shown as
follows.
To store the setting as shown, select “OK.”
The program that does not have a
mark
next to it has priority and the overlapped
programs start recording only after the first
program has finished.
To cancel the overlapped setting, select
“Cancel.”
To confirm, change, or cancel a timer
recording
See “Checking/Changing/Canceling Timer
Settings (Timer List)” on page 44.
To extend the recording duration time
while recording
1
Press OPTIONS during recording to
select “Extend Rec Time,” and press
ENTER.
2
Press M/m to select the duration time.
You can set the duration in increments of
10 minutes, for a maximum of 60 minutes.
3
Select “OK” and press ENTER.
z Hint
If you are recording to a DVD-RW (VR mode) at a
recording mode that is SP or lower and is a 2x speed
or higher disc, you can play the title as it is being
recorded by selecting the program title on the Title
List (page 53).
,continued