SOYO SY-P4I845PEISA - Manual (Page 22)

Hardware Installation SY-P4I845PEISA/GEISA
17
Step 3 Connect cables, case wires, and power supply
Install expansion cards
This section tells how to connect internal peripherals and the power supply
to the Motherboard.
Examples or internal peripherals are of IDE devices (HDD, CD-ROM),
Floppy Disk Drive, Chassis Fan, Front Panel Devices (ACPI LED, Internal
Speaker, Reset Button, IDE LED, and KeyLock Switch.), Wake-On-LAN
card, VGA card, Sound Card.
For more details on connecting internal and external peripherals to your new
SY-P4I845PEISA/GEISA Motherboard, please refer to SY-P4I845PEISA/
GEISA Motherboard User's Manual and Technical Reference online manual
on the CD-ROM.
Step 4 Installation of Expansion Cards
The motherboard has 1 AGP slot, 4 PCI slots and 3 ISA slots.
1. Read the related expansion card’s instruction document before inserting
the expansion card into the computer.
2. Press the expansion card firmly into the expansion slot on the motherboard.
3. Be sure the metal contacts on the card are indeed seated in the slot.
4. Replace the screw to secure the slot bracket of the expansion card.
5. Install required driver for the operating system you use.
Note1: Only AGP card with 1.5 volts can be used in this M/B (any
card supporting AGP 4X or higher). Using 3.3 volts AGP card
(AGP 1X or 2X cards) will damage your motherboard. For AGP
card voltage specification, please check the AGP card manual or
contact your AGP card manufacturer.