Smeg CWC500R - Manual (Page 15)

14
12 SCREEN DISPLAYED ANOMALIES (USER)
After having turned the machine off and on again, if the problem persists communicate the type of error displayed
on the screen to technical assistance:
E1 Boiler sensor malfunction
E2 Tank sensor malfunction
E3
Water loading timeout ( the water loading duration has exceeded the time set in P9 )
E6
Draining anomaly. At the end of the draining phase the CPU still detects water in the Tank. This may be
due to: Drain pump malfunction, Drain tube blockage, Tank Pressostat malfunction, Drain cycle time set
too low
E7
30 minute Tank timeout
E8
15 minute boiler timeout