Tuner band setting, Manual clock set – Samsung DVD-V3500 User Manual

Page 10

Advertising

Tuner Band Setting

This feature allows you to manually set the DVD-VCR’s tuner

band to Antenna or Cable, whichever you connected to the
Antenna In jack during initial setup.
• Use this setting only if Auto Setup detected the incorrect tuner

band, i.e. channels are coming in on the wrong channel numbers.

Open “MENU”
With the DVD in Stop or Play mode, press the MENU button.

Select “SETUP”
Using the UP/DOWN buttons, move the selection bar to “SETUP”
then press ENTER to select.

Select “Channel”
Using the UP/DOWN buttons, move the selection bar to “Channel”,
then press ENTER to select.

Select “Ant/Cable”
Move the selection arrow to “Ant/Cable” then press right to select
from the following options:

• Antenna - Indicates that the DVD-VCR is connected to an indoor

or outdoor VHF/UHF antenna.

• Cable TV - Indicates that the DVD-VCR is connected to Cable TV.

If Auto Setup fails to set the DVD-VCR’s internal clock by locating
a local TV station, follow these steps to set the date and time
manually.
NOTE: For accurate Timer Recording, your DVD-VCR's internal

clock must be set correctly.

Open “MENU”
Press the MENU button while the DVD is in Stop or Play mode.

Select “SETUP”
Using the UP/DOWN buttons, move the selection bar to “SETUP”
then press ENTER to select.

Select “Clock”
Use the UP/DOWN buttons to highlight “Clock ” then press the
ENTER button.

Select “Manual Clock”
Move the highlight to “Manual Clock”, then press the ENTER
button.
• The Clock Set/Adjust menu will change as shown.

Set the Clock
Use the Left/Right buttons to select each of the following options,
then use the UP/DOWN buttons to set each option:

• Hour

– Set the hour.

• Minute – Set the minute.
• Month – Set the month.
• Day

– Set the day.

• Year

– Set the year.

Confirm Settings
Press the RETURN button to confirm your clock settings and to
return to the Setup Menu.
• Press the RETURN button again to exit.

Manual Clock Set

Language : English