Sony PCLink - Manual (Page 10)

10
-GB
3
To verify that your computer is running the necessary Apple
Audio Extensions, close all open applications. On the desktop,
find the icon that corresponds with your Mac hard drive. Double
click on it. A window will open listing all the files and folders on
your hard drive. Scroll down and find the System Folder icon.
Click on the arrow to the left of the System Folder icon so that all
the folders contained in the System Folder become visible.
Scroll down until you find the Extensions folder and click on
the arrow to the left of the folder icon. In the files that are listed
in the Extensions folder, scroll down and verify that a file Apple
Audio Extension appears. Check that the version of this file is
1.0.5 or higher. If a version column does not appear, go to View
in the top navigation bar and select View Options. Place a
check next to Version in the Show Columns section. Click OK.
A version column will now appear and let you check the version
of the Apple Audio Extension file running on your computer. If
your system is not running Apple Audio Extension 1.0.5 or
higher, the PCLink may not operate.
4
After verifying that your computer has the necessary operating
system and audio extensions, close all applications. Plug the
supplied USB cable into a USB port on your computer. Now plug
the PCLink into the other end of the USB cable. Do not plug the
PCLink into a USB hub, as other devices on the hub may effect
the digital audio data running to the PCLink, causing unwanted
pops and clicks in your recordings.
5
Your computer will now automatically initiate the PCLink and
set it as the preferred playback device. After a few seconds, you
should notice that no audio will come out of your computer
speakers. If you can still hear sound coming out your computer
speakers, verify that you are running the minimum operating
system and Apple Audio Extensions requirements. The
installation of your PCLink is now complete. Please proceed to
the next section, “Recording to MiniDisc” (page 11).