Sharp VL-A110U - Manual (Page 66)

V L - A 1 1 0 U / p p . 0 5 5 - 0 5 7 ; 0 0 / 1 1 / 2 1 / 1 8 : 0 0
G. K . A s s o c i a t e s , To k y o
57
References
References
Specifications
VIEWCAM
Signal System: NTSC standard
Recording System: 2 rotary heads, helical scanning system
Cassette: 8 mm video tape, MP type
Recording/Playback Time: 120 minutes (P6-120)
Tape Speed: 14.345 mm/second
Pickup Device: 1 ⁄
4
Љ (6.4 mm, effective size: 4.5 mm) CCD image sensor (with
approx. 270,000 pixels including optical black)
Lens: 16 ן power zoom lens (F1.4, fס4.0–64.0 mm), and full-range
auto focus
Lens Filter Diameter: 46 mm
Monitor: 3 Љ (7.5 cm) full-color LCD screen (TFT active matrix)
Microphone: Electret monaural microphone
Color Temperature Compensation: Auto white balance with white balance lock
Minimum Illumination: 0.8 lux (5 lux measured by EIA standard) (with gain-up, F1.4)
Video Output Level: 1.0 Vp-p 75-ohm unbalanced
Audio Output Level: מ8 dBs, impedance less than 2.2 kohms
Speaker Output: 200 mW
Power Requirement: DC 3.6 V (with battery pack)
DC 7.0 V (with AC adapter)
Power Consumption: 5.1 W (during camera recording in full auto mode with zoom
motor off and backlight in normal mode)
Operating Temperature: 0 ЊC to ם40ЊC (32ЊF to 104ЊF)
Operating Humidity: 30% to 80%
Storage Temperature: מ20ЊC to ם60ЊC (מ4ЊF to 140ЊF)
Dimensions (approx.): 7 7 ⁄
32
Љ (W) ן 4 9 ⁄
32
Љ (H) ן 3 7 ⁄
8
Љ (D)
[183 mm (W) ן 109 mm (H) ן 99 mm (D)]
Weight (approx.): 1.57 lbs (710 g) (without battery pack, lithium battery, video
cassette, and lens cap)
Battery Pack (BT-H22)
DC Output: 3.6 V
Dimensions (approx.): 2 1 ⁄ 8
Љ (W) ן 3 ⁄ 4
Љ (H) ן 2 7 ⁄ 32
Љ (D) [54 mm (W) ן 19 mm (H) ן 56 mm (D)]
Weight (approx.): 0.30 lbs (136 g)
AC Adapter (UADP-0312TAZZ)
Power Requirement: AC 110–240 V, 50/60 Hz
DC Output: 7.0 V
Power Consumption: 15 W
Dimensions (approx.): 2 11 ⁄
16
Љ (W) ן 1 15 ⁄
32
Љ (H) ן 5 13 ⁄
32
Љ (D) [68 mm (W) ן 37 mm (H) ן 137 mm (D)]
Weight (approx.): 0.68 lbs (308 g)
Specifications are subject to change without notice.
SERVICE INFORMATION (For the U.S.)
For the location of the nearest Sharp Authorized Service, or to obtain product literature, accessories,
supplies or customer assistance, please call 1-800-BE SHARP (1-800-237-4277) or visit SHARP’s
website (http://www.sharp-usa.com).