Sun Microsystems Sun Blade T6300 - Manual (Page 15)

7
C H A P T E R
2
Installation and Configuration
After you have familiarized yourself with the features and components of the Sun
Blade T6300 server module, use the instructions in this chapter to install the server
into the chassis.
This chapter contains the following topics:
■ “Handling the Module” on page 7
■ “Installing the Module Into the Chassis” on page 8
■ “Powering On the Server Module” on page 10
■ “Installing an Operating System on a Hard Drive” on page 10
Handling the Module
Electronic equipment is susceptible to damage by static electricity. Use a grounded
antistatic wriststrap, footstrap, or equivalent safety equipment to prevent
electrostatic damage (ESD) when you install the Sun Blade T6300 server module.
Caution – To protect electronic components from electrostatic damage, which can
permanently disable the system or require repair by Sun service technicians, place
components on an antistatic surface, such as an antistatic discharge mat, an antistatic
bag, or a disposable antistatic mat. Wear an antistatic grounding strap connected to a
metal surface on the chassis when you work on system components.