Reference, Troubleshooting, Setting up the parental control – Samsung DVD-P240 User Manual

Page 24

Advertising
background image

REFERENCE

46

47

Troubleshooting

Before requesting service (troubleshooting), please check the following.

No operations can be
performed with remote.

The screen ratio cannot
be changed.

No audio.

Play mode differs from the
Setup Menu selection.

Disc Menu doesn’t appear.

The icon appears on
screen.

Forgot password

The screen is blocked

If you experience other
problems.

5.1 channel sound is not
being reproduced.

Disc does not play.

• Check the batteries in the remote. They may need replacing.
• Operate the remote control at a distance of no more than 20 feet.
• Remove batteries and hold down one or more buttons for several

minutes to drain the microprocessor inside the remote to reset it.
Reinstall batteries and try to operate the remote again.

• Ensure that the disc is installed with the label side facing up.
• Check the region number of the DVD.

• 5.1 channel sound is reproduced only when the following

conditions are met. :

1) The DVD player is connected with the proper amplifier
2) The disc is recorded with 5.1 channel sound.

• Check whether the disc being played has the “Dolby 5.1 ch” mark

on the outside.

• Check if your audio system is connected and working properly.
• In a SETUP Menu, is the Audio Output set to Bitstream?

• The features or action cannot be completed at this time because:

1. The DVD’s software restricts it.
2. The DVD’s software doesn’t support the feature (e.g., angles).
3. The feature is not available at the moment.
4. You’ve requested a title or chapter number or search time that

is out of range.

• Check if the disc has a Menu.

• Some of the functions selected in the Setup Menu may not work

properly if the disc is not encoded with the corresponding function.

• The Screen Ratio is fixed on your DVDs.

• Make sure you have selected the correct Digital Output in the

Audio Options Menu.

• Press power on from a cold start with no disc in the unit. Press the

STOP ( ) and PLAY ( ) buttons simultaneously on the front
panel for three seconds. The SELECT MENU LANGUAGE display
will appear. Select the number button of the desired language.

• Press power on from a cold start with no disc in the unit. Press the

STOP ( ) and PLAY ( ) buttons simultaneously on the front
panel for three seconds. The SELECT MENU LANGUAGE display
will appear. Select the number button of the desired language.
Press the MENU button, and then press DOWN button to select
the Parental Setup. The Parental Setup is now unlocked as
indicated on the display. You can change your password.
See page 45.

• Go to the contents and find the section of the instruction book that

contains the explanations regarding the current problem, and follow
the procedure once again.

• If the problem still cannot be solved, please contact your nearest

authorized service center.

Action

Problem

Page

P5

P9

P14

P42

P17

P39~45

P44

P42

P44

P45

Setting Up the Parental Control

With the player in Stop mode, press the MENU
button.

Select Setup using UP/DOWN buttons, then RIGHT
or ENTER button.
The player is locked ( ).

Select Parental Setup using UP/DOWN buttons,
then press the RIGHT or ENTER button.

Enter your password.
The Parental Setup screen appears.

Select Rating Level using UP/DOWN buttons, and
press ENTER or RIGHT button.

Select Rating Level you want using UP/DOWN
buttons. For example, if you select up to Level 6,
discs that contain Level 7, 8 will not play.

- To cancel the Rating Level, select No using RIGHT or ENTER

in Use Password.

About the Change Password;

- Highlight Change Password using UP/DOWN buttons.
- Press ENTER button.

The CHANGE PASSWORD screen appears.

- Enter your new password. Enter the new password again.

PASSWORD CHECK

Enter Password

- - - -

0

~

9

RETURN

RATING LEVEL

Level 8 Adult
Level 7
Level 6

Level 6
Level 5

Level 5
Level 4

Level 4
Level 3

Level 3
Level 2

Level 2
Level 1 Kids Safe

Level 1 Kids Safe

e.g) Setting up in LEVEL6.

NOTE

How to make the SETUP menu disappear or return to menu screen during set up;

Press RETURN or LEFT button.

• If you have forgotten your password, see Forgot Password in the Troubleshooting Guide.

1

2

3

4

5

6

Advertising