Samsung DVD-F1080 EN - Manual (Page 6)

6
Front Panel Controls
1. STANDBY/ON ( )
When STANDBY/ON is pressed on, the indicator goes
out and the player is turned on.
2. STANDBY Indicator
When the unit is first plugged in, the indicator lights.
3. DISC TRAY
Place the disc here.
4. OPEN/CLOSE ( )
Press to open and close the disc tray.
5. SKIP ( ) / SEARCH
Use to reverse skip a scene or music..
6. STOP ( )
Stops disc play.
7. PLAY/PAUSE ( )
Begin or pause disc play.
8. SKIP ( ) / SEARCH
Use to forward skip a scene or music.
Description
1. DIGITAL AUDIO OUT JACKS
- Use coaxial digital cable to connect to a compatible
Dolby Digital receiver.
- Use coaxial digital cable to connect to an A/V
Amplifier that contains a Dolby Digital, MPEG2 or
DTS decoder.
2. COMPONENT VIDEO OUT JACKS
- Use these jacks if you have a TV with Component
Video in jacks. These jacks provide P
R
, P
B
and Y video.
- If P-SCAN Video Output is selected in Setup Menu,
progressive scan mode will work.
- If I-SCAN Video Output is selected in Setup Menu,
interlaced scan mode will work.
3. AUDIO OUT JACKS
- Connect to the Audio input jacks of your television or
audio/video receiver.
4. VIDEO OUT JACK
- Use a video cable to connect to the Video input jack
on your television.
5. AC IN JACK
- Use AC IN cable(Included) to connect this jack into
the power outlet.
Rear Panel (DVD-FP580)