Sony CMT-U1BT - Manual (Page 10)

10 GB
CMT-U1BT.GB.2-683-494-11(1)
To use the remote
Slide and remove the battery compartment lid
 , and insert the two supplied R6 (size AA)
batteries,  side first, matching the polarities
shown below.
Notes
• With normal use, the batteries should last for about six
months.
• Do not mix an old battery with a new one or mix
different types of batteries.
• If you do not use the remote for a long period of time,
remove the batteries to avoid damage from battery
leakage and corrosion.
Setting the clock
1
Press / (power)

to turn on the
system.
2
Press CLOCK/TIMER SET  .
If the current mode appears on the display,
press /  repeatedly to select
“CLOCK SET?” and then press ENTER  .
3
Press /  repeatedly to set
the hour, and then press ENTER  .
4
Use the same procedure to set the
minutes.
When you turn off the system after setting
the clock, the clock display appears instead
of the demonstration display.
The clock settings are lost when you
disconnect the power cord or if a power
failure occurs.