Swim'n Play side deck - Manual (Page 11)

11
3” SPECIAL POSTS / CHECK YOUR WORK AND TIGHTEN
Attach the 3” special post to the fence post brackets installed underneath your deck
using the 2” screws and nuts.
Make sure that your deck is level front to back. Also make sure that all your posts are straight up and
down. Tighten all screws, nuts and bolts securely.
Attach the deck to bracket adapter
to the 3” special post using
the 2” screws and nuts.
Make sure the deck to bracket
adapter is touching the
framework of your deck
for support.
Drill a hole in the framework
of your deck, and attach the
deck to bracket adapter
to your deck using the
½” screws and nuts as shown.
3” SPECIAL POST
DECK TO
BRACKET
ADAPTER
POOL
VERTICAL
UNDERSIDE OF WALK DECK
HEX NUT
1/2” TRUSS
HEAD SCREWS
DECK
LEVEL
POOL
VERTICAL POST
3” SPECIAL
POST
ASSEMBLY
LEVEL
9
10
DECK LEDGES
Place the two
deck ledges over the
vertical top plates.
Secure the Deck ledges
to your assembled deck
using the 1” Round Head
Screw, washers and nuts
provided.
If any holes do not
match up, drill your
own holes,
assuring that your
deck surfaces line up.
VIEW FROM
ABOVE