Sony KV-14FV1U - Manual (Page 2)

23.09.2000 SAT 12:00
Auto Clock Set
Exit: OK
Confirm that the aerial is connected
and then press the OK button on the
remote control.
8 Switching on the Video
TV
Your television stations are now stored in your television’s memory.
The first time that you switch on
your TV, the Language menu appears
automatically.
5
Press the or button on the
remote control to select the language,
then press the OK button on the
remote control to confirm your
selection.
7 Automatically Tuning the TV
You need to tune the Video TV to receive channels (TV
Broadcast).
By following the instructions below, this TV automatically
searches and stores all available channels for you.
Press the OK button on the remote
control to select Yes.
The Video TV starts to automatically
search and store all available
channels (TV Broadcast) for you.
This procedure could take some
minutes.
Please be patient and do not press
any button while the automatic
tuning is in progress. Otherwise
the automatic tuning will not be
completed.
Changing the Programme
Order of the TV channels
By following the instructions below, you can rearrange
the order in which the channels appear on the screen.
·
Press the PROGR + or - button to
select the programme number
with the channel (TV Broadcast)
you wish to rearrange. This TV
Broadcast will appear on the
screen.
·
Press the or button to select
the new programme number
position for your selected channel
(TV Broadcast), then press the OK
button.
The word Confirm is
highlighted for a few seconds
to confirm that the new
programme position is stored.
·
Repeat steps b)1 and b)2 if you
wish to change the order of the
other channels.
·
When you have finished
rearranging the order of the
channels, press OK.
a) If you do not wish to change the channel order:
b) If you wish to change the channel order:
·
Press the OK button on the
remote control and go to step 9.
The Automatic Tuning menu appears on
the TV screen in the selected language.
When the automatic tuning is finished, the
Programme Sorting menu appears on the
screen.
Do you want to start
automatic tuning?
Yes
No
OK
Please confirm that
aerial is connected
Confirm
OK
6
Selecting the language of
the menu screens
This Video TV set works with menu screens. By following the
instructions below, you can select the desired language of the
menu screens.
Connect the TV plug to
the mains socket
(220-240V AC, 50Hz)
Press on the mark on the front
of the Video TV to reveal the front
control panel.
Press the main
on/off button on the TV set to
turn on the Video TV.
Do you want to start
automatic tuning?
Yes
No
OK
The Video TV
automatically adjusts the clock
setting, and after a few seconds date
and time settings will be displayed.
If you want to change the time
settings, you can adjust it manually
through the menu system (for details,
see “Setting the Clock Manually”
section of the instruction manual.
Press the MENU button to remove
the menu from the screen.
Your Video TV is now ready
for use.
Adjusting Clock...
Auto Clock Set
Language
Select Language:
English
Deutsch
Netherlands
Français
Italiano
Español
Português
OK
Language
Select Language:
English Deutsch
Netherlands
Français
Italiano
Español
Português
OK
Programme: 01 -> 01
Confirm:
Programme Sorting
Select channel: PROG + -
Select new position:
Exit:
OK OK
Programme: 02 -> 04
Confirm:
Programme Sorting
Select channel: PROG + -
Select new position:
Exit:
OK OK Programme: 01
System:
I
Channel: C21
Auto Tuning
Searching...
Programme: 01 -> 01
Confirm:
Programme Sorting
Select channel: PROG + -
Select new position:
Exit:
OK OK
9
Adjusting Automatically
the Clock Settings Programme: 01 -> 01
Confirm:
Programme Sorting
Select channel: PROG + -
Select new position:
Exit:
OK OK