Sunbeam MG6500 - Manual (Page 9)

9
• Switch the appliance on.
• Insert the appliance into the ear or nose but no more than
6mm.
• Rotate in a circular movement.
• The appliance can also be used to trim stray eyebrow hairs.
Move the appliance slowly and carefully keeping the unit
away from the eye socket.
• Remove all attachments by twisting anticlockwise and
pulling off.
Using the beard & sideburn trimmer
• Attach the beard & sideburn trimmer attachment by placing
on the unit and turning clockwise until it clicks into place.
• Choose the length of beard or moustache you require and
attach the appropriate comb by placing over the head of the
attachment and clicking into place.
• Move the switch on the comb to the required length. We
recommend that you start with a longer length and then
move to a shorter cut if necessary.
• Ensure that your beard or moustache is dry and using the
comb provided, make sure that all the hairs are facing the
same direction.
• Switch the appliance on.
• Start under the chin and follow your jaw line moving in an
upward direction.
Using your Cordless Beard Trimmer &
Shaper continued