Mechanism operation – Sanyo DVD-9501KR User Manual
Page 5
Advertising
- 4 -
MECHANISM OPERATION
3. Match the mark of GEAR
2
and mark of GEAR
3
,
and then install the BOSS.
4. Turn the GEAR
1
counterclockwise, and then SLIDE
move right side.
5. The GEAR
1
move from side to side.
LOARDING
GEAR
MARKER
MARKER
TRAY
HOLE
6
7
8
9
1.How to setting the tray.
1. Move the SLIDE left side.
2. Match the Hole of GEAR
5
and Hole of CHASSIS
4
.
6. Match the hole of GEAR
7
and hole of chassis while turning
GEAR
6
.
7. Match the mark of LOADING GEAR
8
and gear of TRAY
where see horn hole
9
of tray.
8. Push a tray with the state that turned the entire surface of a
tray into approximately 5 degrees the lower part slowly.
CHASSIS
FRONT SIDE
MOTOR
MARKER
MARKER
1
2
2
3
3
RIB
RIB
GREASE
EM-50L
GREASE
EM-50L
GREASE
EM-50L
LARGE TOOTH
GEAR HOLE
CHASSIS HOLE
5
4
Advertising
This manual is related to the following products: