Precautions – Sony WAHT-SA20 User Manual

Page 4

Advertising
background image

4

US

Precautions

On power sources

• The unit is not disconnected from the mains as

long as it is connected to the AC outlet, even if
the unit itself has been turned off.

• As the main plug is used to disconnect the unit

from the mains, connect the unit to an easily
accessible AC outlet. Should you notice an
abnormality in the unit, disconnect the main plug
from the AC outlet immediately.

On placement

• Do not place the system in locations that are hot

and subject to direct sunlight, dusty, very humid,
or extremely cold.

• Use caution when placing the system on a

specially treated (waxed, oiled, polished, etc.)
floor, as staining or discoloration may result.

• Allow adequate air circulation to prevent internal

heat buildup.

• Do not place the system on surfaces (rugs,

blankets, etc.) or near materials (curtains,
draperies) that may block the ventilation slots.

• Do not install the system near heat sources such

as radiators or air ducts, or in a place subject to
direct sunlight, excessive dust, mechanical
vibration or shock.

• Do not install the system in an inclined position.

It is designed to be operated in a horizontal
position only.

• Keep the system away from equipment with

strong magnets, such as microwave ovens, or
large loudspeakers.

• Do not place heavy objects on the system.
• If you use more than one set of S-AIR products,

position them away from each other to avoid
cross talk.

• Install this surround amplifier and S-AIR

products at least 50 cm away from people.

• To prevent fire or shock hazard, do not place

objects filled with liquids, such as vases, on the
apparatus.

• Do not place the system on carpet, as

discoloration may result.

• If you use more than one surround amplifier, do

not place one on top of the other.

On cleaning

Clean the cabinets only with a soft dry cloth. Do
not use any type of abrasive pad, scouring powder
or solvent such as alcohol or benzene.

Safety

• If anything falls into the cabinet, unplug the unit

and have it checked by qualified personnel
before operating it any further.

• Unplug the unit from the wall outlet (mains) if

you do not intend to use it for an extended period
of time. To disconnect the cord, pull it out by the
plug, never by the cord.

Advertising