Samsung ML-3051N - Manual (Page 95)

Using Your Printer with a Macintosh
31
8
Using Your Printer with
a Macintosh
Your printer supports Macintosh systems with a built-in USB
interface or 10/100 Base-TX network interface card. When you
print a file from a Macintosh computer, you can use the driver by
installing the PPD file.
N OTE : Some printers do not support a network
interface. Make sure that your printer supports a
network interface by referring to Printer Specifications
in your Printer User’s Guide.
This chapter includes:
• Installing printer driver for Macintosh
• Setting Up the Printer
• Printing
Installing printer driver for
Macintosh
ML-3050 only
The CD-ROM that came with your printer provides you with the
PPD file that allows you to use the CUPS driver or Apple
LaserWriter driver
(only available when you use a printer
which supports the PostScript driver) , for printing on a
Macintosh computer.
Install the Printer driver
1
Make sure that you connect your printer to the computer.
Turn on your computer and printer.
2
Insert the CD-ROM which came with your printer into the
CD-ROM drive.
3
Double-click CD-ROM icon that appears on your
Macintosh desktop.
4
Double-click the MAC_Installer folder.
5
Double-click the Printer folder.
6
Double-click the Samsung SPL2 Installer icon.
7
Enter the password and click OK.
8
The Samsung SPL Installer window opens. Click Continue
and then click Continue.
9
Select Easy Install and click Install.
10
After the installation is finished, click Quit.
Uninstalling the Printer driver
Uninstall is required if you are upgrading the software, or if
installation fails.
1
Insert the CD-ROM which came with your printer into the
CD-ROM drive.
2
Double-click CD-ROM icon that appears on your
Macintosh desktop.
3
Double-click the MAC_Installer folder.
4
Double-click the Printer folder.
5
Double-click the Samsung SPL2 Installer icon.
6
Enter the password and click OK.
7
The Samsung SPL Installer window opens. Click Continue
and then click Continue.
8
Select Uninstall and then click Uninstall.
9
When the uninstallation is done, click Quit.
ML-3051N/ML-3050ND only
The PostScript driver CD-ROM that came with your machine
provides you with the PPD file to use the PS driver, Apple
LaserWriter driver, for printing on a Macintosh computer.
Also, it provides you with the Twain driver for scanning on a
Macintosh computer.
1
Connect your machine to the computer using the USB
cable or the Ethernet cable.
2
Turn on your computer and the machine.
3
Insert the PostScript driver CD-ROM which came with your
machine into the CD-ROM drive.
4
Double-click the Samsung_LBP on your Macintosh
desktop.
5
Double-click the MAC_Installer folder.
Double-click the Samsung_LBP Installer OSX icon.
6
Click Continue.
7 Click Install.
8
After the installation is finished, click Quit.