Important safety instructions, Prevent power cord damage, Provide ventilation and select a location – Scientific Atlanta Z70DVBTM User Manual

Page 4: Accessories warning, Ground the product, Protect the product from lightning, Eliminate ac mains overloads

Advertising
background image

2

Prevent Power Cord Damage

Protect the power cord from being walked on or pinched,
particularly at plugs, convenience receptacles, and the point
where the cord exits from the apparatus.

Provide Ventilation and Select a
Location

• Do not block any ventilation openings. Install in accordance

with the manufacturer’s instructions.

• Do not place this apparatus on a bed, sofa, rug, or similar
surface.

• Do not place this apparatus on an unstable surface.

• Do not install near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including amplifi ers)

that produce heat.

• Do not install this apparatus in an enclosure, such as a

bookcase or rack, unless the installation provides proper

ventilation.

• Do not place entertainment devices (such as VCRs or DVDs),

lamps, books, vases with liquids, or other objects on top of

this

product.

Protect from Exposure to Moisture
and Foreign Objects

Do not use this apparatus near water.

WARNING:

Avoid electric shock and fi re hazard! Do not expose
this product to liquids, rain, or moisture.

WARNING:

Avoid electric shock and fi re hazard! Unplug this
product before cleaning. Clean only with a dry cloth.
Do not use a liquid cleaner or an aerosol cleaner.
Do not use a magnetic/static cleaning device (dust
remover) to clean this product.

WARNING:

Avoid electric shock and fi re hazard! Never push
objects through the openings in this product. Foreign
objects can cause electrical shorts that can result in
electric shock or fi re.

Accessories Warning

WARNING:

Avoid electric shock and fi re hazard! Only use
attachments/ accessories specifi ed by your service
provider or the manufacturer.

Read These Instructions

Keep These Instructions

Heed All Warnings

Follow All Instructions

Power Source Warning

A label on this product indicates the correct power source for
this product. Operate this product only from an electrical outlet
with the voltage and frequency indicated on the product label.
If you are uncertain of the type of power supply to your home
or business, consult your service provider or your local power
company.

Ground the Product

WARNING:

Avoid electric shock and fi re hazard! Do not defeat
the safety purpose of the polarized or grounding-
type plug. A polarized plug has two blades with one
wider than the other. A grounding-type plug has two
blades and a third grounding prong. The wide blade
or the third prong is provided for your safety. If the
provided plug does not fi t into your outlet, consult
an electrician for replacement of the obsolete outlet.

If this product connects to coaxial cable wiring, be sure the
cable system is grounded (earthed). Grounding provides some
protection against voltage surges and built-up static charges.

Protect the Product from Lightning

For added protection, unplug this apparatus during lightning
storms or when unused for long periods of time. In addition to
disconnecting the AC power from the wall outlet, disconnect the
signal inputs.

Verify the Power Source from the
On/Off Power Light

When the on/off power light is not illuminated, the apparatus may
still be connected to the power source. The light goes out when
the apparatus is turned off, regardless of whether it is still plugged
into an AC power source.

Eliminate AC Mains Overloads

WARNING:

Avoid electric shock and fi re hazard! Do not overload AC
mains, outlets, extension cords, or integral convenience
receptacles. For products that require battery power or
other power sources to operate them, refer to the
operating instructions for those products.

IMPORTANT SAFETY INSTRUCTIONS

Advertising
This manual is related to the following products: