Samsung SCC-B5345 - Manual (Page 11)

10
ENG
11
❚ Installing camera
Before installation
Before installing your camera, you have to read the following cautions:
 You have to check whether the location (ceiling or wall) can bear five times the weight of your camera.
 Don’t let the cable to be caught in improper place or the electric line cover to be damaged. Otherwise it
may cause a breakdown or fire.
 When installing your camera, don’t allow any person to approach the installation site. If you have any
valuable things under the place, move them away.
 Partial blind spot can occur at tilt angles of less than 20°, depending on the lens configuration.
Installation procedure
To install your camera
1 Pry up the outer casing with a flat-head screwdriver
to remove the protective cover from the Main body of
the camera.
2 Remove the Mount bracket from the Main body by
rotating the Main body in the UNLOCK direction while
pushing the Lock releaser outward. If it is not easily
done, rotate the Mount bracket in the LOCK direction
while holding small holes on the Mount bracket.
3 Fix the Mount bracket to the location (ceiling or wall)
with supplied three screws.
Note
The CAMERA FRONT sign on the Mount bracket
should face the camera monitoring area.
1
2
3
Ceiling mount
opener
B5344_B5345-00687D(00).indb 11 2008-09-05 오전 10:40:25