Samsung DV331AG - Manual (Page 16)

16_ installing your dryer
CONNECTING THE INLET HOSE
Method1
The dryer must be connected to the cold water faucet using the new inlet hoses. Do not use old
hoses.
1. If space permits, attach the brass female end of the “Y”
connector to the cold water faucet.
2. Turn the cold water faucet off.
3. Attach the straight end of long hose to “Y’ connector.
4. Using pliers, tighten the coupling with an additional two-
thirds turn.
Do not overtighten, as it may damage the coupling.
5. Attach angled end of long hoses to fi ll the valve at the
bottom of the dryer’s rear frame. Screw on coupling by
hand until it is seated on fi ll valve connector.
6. Using pliers, tighten the coupling with an additional two-
thirds turn.
Do not overtighten, as it may damage the coupling.
7. Check that the water faucets are on.
8. Check for leaks around “Y” connector, faucets and hoses.
installing your dryer
DV331AE-03026A-01_EN.indd Sec5:16 DV331AE-03026A-01_EN.indd Sec5:16 2011-03-28 12:18:01 2011-03-28 12:18:01