SIIG 04-0476A - Manual (Page 3)

3
Hardware Installation
Static Electricity Discharge may permanently damage
your system. Discharge any static electricity build up in
your body by touching your computer case for a few
seconds. Avoid any contact with internal parts and
handle cards only by their external edges.
1.
Turn OFF the power to your computer.
2. Unplug the power cord and remove your computer's
cover.
3. Attach the Isolation sponge to the SATA-to-IDE
Adapter, refer to figure 2 and 3. This step is optional.
Figure 4 Figure 5
4. Connect the SATA-to-IDE Adapter to the Ultra ATA/
ATAPI device, refer to figure 4 and 5.
Figure 3: After
attaching sponge
Figure 2: Before
sponge
Sponge