Samsung MM-J5S - Manual (Page 7)

If you do not want to store the radio station found, revert to Step 4 and
search for another station.
Otherwise:
a Press PROGRAM/SET
Result: The program number is displayed for a few seconds.
b Press TUNING and to assign a program number between 1
and 15.
c Press PROGRAM/SET to store the radio station.
Result: The program number is no longer displayed and the station is
stored.
To store any other radio frequencies required, repeat Steps 3 to 6.
The PROGRAM function can be used to assign a new station to
an existing program number.
You can listen to a stored radio station as follows:
Switch the system on by pressing Standby/On ( ).
Select the TUNER function by pressing TUNER/BAND on the front panel.
Select the required frequency band by pressing TUNER/BAND.
Select the radio station as follows.
To listen to ... Press ...
A stored station........................... a Press the TUNING MODE button
until “PRESET” is displayed.
b TUNING and to select the
required station.
Press TUNING MODE again to exit the stored station selection
function.
You can improve the quality of radio reception by:
Rotating the FM or AM(MW) aerial
Testing the positions of the FM and AM(MW) aerials
before fixing them permanently
If reception from a specific FM radio station is poor, press MO/ST
to switch from stereo mode to mono. The quality of the sound will
be improved.
GB
GB
12
You can check and change your selection of tracks at any time.
You must have selected at least one track.
Press Stop ( ) once if you have started listening to the selection.
Press PROGRAM / SET.
Each time you press Program/Set, the next selection is displayed.
Press PROGRAM / SET one or more times until the track to be changed
is displayed.
Press or to select the new track.
Press PROGRAM / SET.
Press CD ( ) to start listening to the selection.
Result: The first track selected is played.
You can change one or more tracks in your initial selection.
You can store up to:
15 FM stations
8 MW station
7 LW station
Switch the system on by pressing Standby/On ( )
Select the TUNER function by pressing TUNER/BAND on the front panel.
Select the required frequency band by pressing TUNER/BAND again.
Result:The appropriate indication is displayed:
FM Frequency Modulation
AM(MW) Medium Wave
LW Long Wave
To search for a station ... Press Tuning Mode ...
Manually.......................................One or more times until MANUAL is
displayed.
Automatically................................One or more times until AUTO is
displayed.
Select the station to be stored by pressing , button on the front
panel to decrease or increase the frequency respectively.
To scroll through the frequencies faster when searching manually,
hold down the , button on the front panel.
The automatic search procedure may stop on a frequency that does
not correspond to a radio station.
If this happens, use the manual search mode.
Adjust the volume by:
Turning the VOLUME+,- knob on the front panel
or
Pressing the VOLUME+,- button on the
remote control.
Select the FM stereo or mono mode by pressing MO/ST on
the remote control.
Checking and Changing Programmed
Tracks Searching for and Storing the Radio
Stations
Selecting a Stored Station
Improving Radio Reception
Searching for and Storing the Radio
Stations(continued)
1
2
3
4
5
6
1
2
3
4
5
8
9
1
2
3
4
CD
TUNER
BAND
MO/ST
TIMER/CLOCK TIMER ON/OFF
AUX PROGRAM/SET REP. A B
SLEEP EQ/S.BASS TAPE SPEED
REPEAT
TUNING
MODE
VOLUME TUNING
MUTE
+10
POWER SOUND DISPLAY PTY RDS
CD
TUNER
BAND
MO/ST
TIMER/CLOCK TIMER ON/OFF
AUX PROGRAM/SET REP. A B
SLEEP EQ/S.BASS TAPE SPEED
VOLUME TUNING
POWER SOUND DISPLAY PTY RDS
BAND
MO/ST
AUX PROGRAM/SET REP. A B
SLEEP EQ/S.BASS TAPE SPEED
POWER SOUND DISPLAY PTY RDS
CD
TA P E
TUNER
BAND
MO/ST
TIMER/CLOCK TIMER ON/OFF
AUX PROGRAM/SET REP. A B
SLEEP EQ/S.BASS TAPE SPEED
REPEAT
TUNING
MODE
VOLUME TUNING
+10
POWER SOUND DISPLAY PTY RDS
13
MO/ST
6
2,3,5
1
7
4 4
TUNER
BAND
MO/ST
TIMER/CLOCK TIMER ON/OFF
AUX PROGRAM/SET REP. A B
SLEEP EQ/S.BASS TAPE SPEED
MUTE
8
8
8
1
BAND
2,3
+10
4
MO/ST
1
2,3
6
7
4 5 5
6
4
4
Function to skip through 10
tracks at a time
Press the +10 button briefly while playing back a
CD. The track 10 tracks after the current one will then
be played back.
Example: If you want to select track 13 during playback of track
5, press the +10 button once, and then press the
button three times.
5 ➝ 10 ➝ 11 ➝ 12 ➝ 13
CD
REPEAT
TUNING
MODE
VOLUME TUNING
+10 +10
+10
MM-J5-RDS(GB) 9/15/04 19:18 Page 12