Sharp XL-S10 - Manual (Page 22)

03/12/18 XL-S10(U)3.fm
22
XL-S10
TINSEA018SJZZ
T
a
pe Rec
o
rding
Recording to a cassette tape (continued)
" Recording from the radio
To stop recording:
Press the button.
Note:
If you hear a whistling noise while recording an AM station, move
the AM loop antenna.
" Erasing a recorded tape
1 Tune in to the desired station (see page 18).
2 Load a cassette into the cassette compartment with the
side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
3 Press the button.
4 Press the button, which also en-
gages the button.
5 Press the button again to begin recording.
1. Load the tape to be erased into the cassette compartment with
the side to be erased facing toward you.
2. Press the FUNCTION button until "TAPE" appears on the dis-
play.
3. Press the button which also engages the button to begin
erasing.
Erase-prevention tabs of cassette tapes:
! When recording on a cassette
tape, make sure that the erase-
prevention tabs are not re-
moved. Cassettes have remov-
able tabs that prevent
accidental recording or erasing.
! To protect the recorded sound,
remove the tab after recording.
Cover the tab hole with the ad-
hesive tape to record on the
tape without the tab.
Side A
Tab for side B Tab for side A