Sharp Aquos LC 32GD6U - Manual (Page 19)

18
Watching TV
A-2. Connecting with cable converter using AUX terminals for audio and video output.
(If your cable TV converter has both RF OUTPUT and AUX terminals, it is recommended to connect it as
shown in example A-1.)
VIDEO AUDIO OUT IN
Cable lead-in IN
signal splitter
(commercially
available)
OUT
VIDEO AUDIO
Coaxial Antenna Cable (commercially available)
RF Cable (Supplied)
Cable TV Converter
VCR
Video Cable (commercially available)
Audio Cable (commercially available)
NOTE
• Be sure to remember what kind of connection is made with your TV.
• Shown here is the preferred method of connecting a VCR and CATV Converter to your TV if you are in an area with good
signal reception. This way you can view either TV programs or VCR tapes and not be concerned about the position of the
VCR’s TV/VCR switch and you can enjoy stereo tape playback from a stereo VCR.
B. Connecting with Cable Converter without VCR
Cable lead-in Cable TV converter
(commercially available)
OUT IN
signal splitter
(commercially
available)
Coaxial Antenna Cable (commercially available)
Coaxial Antenna Cable
(commercially available)
NOTE
• Be sure to remember what kind of connection is made with your TV.
• Switching between ANALOG-A and ANALOG-B is possible by pressing the A-ANALOG-B button on the remote control.
• A good color picture depends on a good TV signal. So does good multi-channel sound. Ask your dealer for advice on
how to install your outdoor antenna to receive the best possible signal.
• If you subscribe to Cable TV or have a central antenna for your building, you may not need an outdoor antenna.
Cable TV/VCR connection (continued)