Stairmaster FREECLIMBER 4400 PT/CL - Manual (Page 43)

Page 34
Quick Scan Programming
You can quickly access any of the custom menus by pressing [LEVEL: ^],
[4], [ENTER]. The console will then display “MACHINE STATUS.” Scroll through
the following options:
[ SELECT ] “ RUN HOURS XXXX” 0
[ SELECT ] “ WORKOUTS XXXX” 1
[ SELECT ] “ DISTANCE XXXX” 2
[ SELECT ] “ CONS 90211- XXX ” 3
[ SELECT ] “ STEPPER” 4
[ SELECT ] -N/A-
[ SELECT ] “ MAINT HOURS xxxx” 6
Resetting the Maintenance Hour Counter
For ease of maintenance records, the 4400/4600 PT/CL console has a
maintenance timer that will clock the number of hours, workouts, and time
between last servicing. After each maintenance period reset the counter.
[ ^ ] [ 7 ] [ 1 ] Reset Service
1. Reset the maintenance hour counter by pressing [LEVEL: ^], [7], [1]. The
console will dusplay “RESET SERVICE.” Press [ENTER]. The console will
display “DONE.” Press [CLEAR] to return to the starting screen.
Configuration Code
The FreeClimber ® console supports other StairMaster ® exercise systems. It
is important to verify that the machine configuration code matches the type of
machine you have.
[ ^ ] [ 8 ] [ 0 ] Change Machine
1. Change the machine type by pressing [LEVEL: ^], [8], [0]. The console will
display “CHANGE MACHINE.” Press [ENTER]. The console will then display
the current machine type. Use the [SELECT] key to toggle between
options. Press [ENTER] for the desired option.
FREECLIMBER 4600/4400 PT/CL CONSOLE