Star Micronics NX-2460C - Manual (Page 73)

Checking the port settings in the User Setup Utility 67
Print Pitch Control Commands
Description Mode ASCII Code
Select one line expanded print Both SO
Same as SO Both ESC SO
Select condensed print Both SI
Same as SI Both ESC SI
Cancel condensed print STD DC2
Set print pitch to pica IBM DC2
Cancel one-line expanded print Both DC4
Set print pitch to elite IBM ESC :
Set print pitch to elite STD ESC M
Set print pitch to pica STD ESC P
Cancel proportional print IBM ESC P00H
Select proportional print IBM ESC P01H
Cancel expanded print Both ESC W0
Select expanded print Both ESC W1
Set print pitch to 15 CPI STD ESC g
Cancel proportional print STD ESC p0
Select proportional print STD ESC p1
Top/Bottom Margin and Vertical Tab Commands
Description Mode ASCII Code
Advance paper to next vertical tab position Both VT
Select VFU channels STD ESC / n
Set vertical tab positions Both ESC B n …NULL
Set bottom margin Both ESC N n
Cancel bottom margin Both ESC O
Set all tabs to power on defaults IBM ESC R
Set VFU in a channel STD ESC b n m…NULL