Samsung FX600 - Manual (Page 18)

I NSTALLATION AND S E T U P
4
Plug in the power cord.
Installing Paper
<If you have an FX1600>
1
Unplug the power cord.
2
Open the cover by pushing
the cover release latch (on
the right side of the
machine).
Rear cover will partially
open.
3
Insert the paper roll.
Plug the power cord into a
standard AC outlet.
The machine will sound a beep, and the
message “THANK YOU” will appear in
the LCD. There is no power switch on
the machine.
The outlet should be located near the
equipment and easily accessible.
Cover may now be opened
completely by pulling it back from
machine case.
If there is an adhesive sticker
sealing the new paper roll, remove it
completely. Be sure the paper exits from
the top of the roll as shown.
The core size of the paper roll must be
from 12.5 up to 12.9 mm (0.49 to 0.51 in).
2.2
C HAPTER T WO : I NSTALLATION AND S ETUP